{"id":7765,"date":"2021-08-09T23:23:58","date_gmt":"2021-08-09T20:23:58","guid":{"rendered":"https:\/\/europan.ua\/?page_id=7765"},"modified":"2023-10-05T17:24:14","modified_gmt":"2023-10-05T14:24:14","slug":"sip-3-sipn-3-aasxs-aasxsn","status":"publish","type":"page","link":"https:\/\/europan.ua\/en\/produkciya\/provoda-samonesushhie-izolirovannye\/sip-3-sipn-3-aasxs-aasxsn\/","title":{"rendered":"SIP-3, SIPn-3, AAsXS, AAsXSn"},"content":{"rendered":"
SIP-3 (\u0410\u0410sXS)<\/strong><\/span> is a self-supporting protected insulated wire with a conductor made of aluminum alloy and protective insulation made of cross-linked polyethylene.<\/p>\n The main difference between this wire and other types of self-supporting wires is the voltage for which it is designed. So, if the wires SIP-1, SIP-2, SIP-4, SIP-5 are intended for power and lighting networks for an alternating voltage of 0.6 \/ 1.0 kV, then SIP-3 is a high-voltage wire used in networks with a rated voltage of 20 kV and 35 kV with a rated frequency of 50 Hz.<\/p>\n SIP-3 and \u0410\u0410sXS are designed for overhead power transmission lines in areas with temperate, cold and tropical climates. They are used for laying highways of overhead power transmission lines with a voltage of 20-35 kV and linear branches thereof.<\/p>\n SIP-3 began to be used for the installation of power lines instead of traditional uninsulated wires A<\/a> and AS<\/a> and immediately provided greater safety for maintenance personnel, lower operating costs and reduced line breakdown rates by minimizing damage to wires and the absence of their entanglement with each other and with tree branches. Due to insulation, even if you accidentally touch the wire, the risk of electric shock is minimal, and in the event of an emergency falling trees or twisting wires, the uninterrupted supply of electricity does not stop.<\/p>\n SIP-3, \u0410\u0410sXS wires are safe to use and do not emit harmful substances into the air even in case of significant heating.<\/p>\n SIPn-3 and \u0410\u0410sXSn are non-flammable types of wire that do not spread combustion and do not form burning particles. SIP-3 (\u0410\u0410sXS), SIPn-3 (\u0410\u0410sXSn) are single-conductor wires. The conductor is made of an aluminum alloy and is twisted around the core of round wires (Table A.2 of The National Standards of Ukraine 4743:2007). The conductor cross-section varies from 35 to 240 mm2. And the insulation of the wires is made of light-stabilized cross-linked polyethylene. Moreover, its thickness depends on the voltage for which the wire is designed.<\/p>\n The insulation of SIPn-3 and AAsXSn is made of a flame retardant polymer composition. This property of the indicated wires is ensured by the addition of a special non-combustible additive in the manufacture of the insulating layer. And this, in turn, makes it possible to significantly reduce the likelihood of fire spread in the event of a fire and to use the SIPn-3, AAsXSn wires in places with an increased risk of fire, in particular at transformer substations and switchboards.<\/p>\n The insulating layer is applied by extrusion, due to which it adheres tightly to the conductor, but is not soldered to it, which makes it easy to remove the insulation during the installation.<\/p>\n SIP-3 wires are designed for operation at ambient temperatures from -60\u00b0C to + 50\u00b0C. Installation without preheating is carried out at an ambient temperature of at least -20\u00b0C, since the insulating sheath of the wire becomes brittle under the influence of lower temperatures and can be damaged when the product is bent.<\/p>\n \u00a0<\/strong>The bending radius during installation and the wire installed on the supports must be at least 10 \u00a0outer diameters of the wire.<\/p>\n The permissible heating temperature of current-carrying conductors during operation is no more than 90\u00b0C, and in the event of a short circuit \u2013 250\u00b0C.<\/p>\n The service life of the wires is 40 years. The guaranteed service life is 3 years.<\/p>\n\u00a0Applicability scope<\/strong><\/h5>\n
Design<\/strong><\/h5>\n
Operation<\/strong><\/h5>\n