Nominal conductor cross-section, mm\u00b2<\/p>\n<\/td>\n

Permissible current of one-second short circuit of cables, kA<\/p>\n<\/td>\n

Nominal conductor cross-section, mm\u00b2<\/p>\n<\/td>\n

Permissible current of one-second short circuit of cables, kA<\/p>\n<\/td>\n<\/tr>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

APvBbSHp is a power cable with the aluminum conductors, XLPE insulation and the BbSHp-type protective sheath. It is designed for the transmission and distribution of the electrical energy in the stationary installations for a rated alternating voltage of 0.66; 1 kV with a frequency of 50 Hz.
\nAPvBbSHp cable is universal, the scope of its application is practically unlimited by the working environment conditions. The installation can be carried out at any angle of inclination of the cable route, overland, overhead, in water, with any soil corrosivity and leakage currents, in rooms with high level of humidity and swampy areas, at low temperatures in the working room and in conditions of rapid changes of temperature.
\nThere are only two factors limiting the use of this cable. It should not be subjected to significant mechanical stretching during installation and operation, and it is not recommended to install it in heaving and subsiding soils. [su_read_more]
\nAPvBbSHp is used for laying single cable lines in earth trenches, rooms, tunnels, channels and partially flooded structures with various corrosive conditions. It is also could be laid outdoors, if the cable is not subjected to significant tension strain, but if there is a risk of mechanical damage during operation.<\/p>\n","protected":false},"author":1,"featured_media":7470,"parent":4797,"menu_order":8,"comment_status":"closed","ping_status":"closed","template":"template-page-product.php","meta":{"inline_featured_image":false},"yoast_head":"\n