{"id":11213,"date":"2023-11-06T12:26:24","date_gmt":"2023-11-06T09:26:24","guid":{"rendered":"https:\/\/europan.ua\/?page_id=11213"},"modified":"2023-11-06T12:29:49","modified_gmt":"2023-11-06T09:29:49","slug":"yb2y","status":"publish","type":"page","link":"https:\/\/europan.ua\/en\/produkciya\/ce-certified-cables\/power-cables\/yb2y\/","title":{"rendered":"YB2Y"},"content":{"rendered":"
YB2Y is a power cable with copper conductors, PVC insulation and a BbSHp-type protective sheath. It is designed for the transmission and distribution of electrical energy in stationary installations for a rated alternating voltage of 0.66; 1 kV with a frequency of 50 Hz.<\/p>\n
Armoured cable YB2Y has a very wide scope of\u00a0 applicability and is quite universal. It can be used for all weather conditions and soils, including leakage currents presence and places where the soil is chemically active with respect to metal. It withstands temperature changes and resists various mechanical influences.\u00a0 The armor made of steel bands protects YB2Y from the damage by rodents and impacts by the tools during excavation work in places where cable lines pass.<\/p>\n
Since the cable has little flexibility and low tensile strength, it is mainly used for the laying in earthen trenches and outdoors when there is a risk of mechanical damage during operation and provided there is a low tension strain. However, it can also be used for laying in rooms, tunnels, channels, mines (except for laying in blocks) and partially flooded structures with various corrosive conditions. It withstands high electrical and mechanical loads, is not susceptible to damage in high humidity conditions and is suitable for laying in various corrosive conditions. It is also easy to install, since it does not require additional devices for laying in the form of pipes and concrete conduits.
It is widely used to connect electrical equipment in the industrial and residential areas. It can be used for installation in rooms with a high level of fire hazard. Moreover, it is flame-retardant in case of single laying while the fireproofing is required in case of group laying.<\/p>\n
YB2Y design is based on copper, single-wire or multi-wire conductors, round or sector shape (class 1, 2 DSTU EN 60228). The conductors insulation and the inner sheath of the cable are made of PVC compound. The armor is made of galvanized steel bands, and the extruded protective hose made of light-stabilized polyethylene serves as a protective coating.<\/p>\n
The cable is designed for stationary operation at the ambient temperatures from -50\u00b0C to +50\u00b0C, the relative air humidity up to 98% at temperatures up to +35\u00b0C. The laying is possible at a temperature not lower than -15\u00b0\u0421, otherwise preheating of the cable is required.<\/p>\n
The minimum bend radius during the installation must be at least 7.5 outer cable diameters for multi conductors cables and 10 outer cable diameters for single-conductor cables.<\/p>\n
The long-term permissible conductors heating temperature during operation is 70\u00b0C. The maximum permissible temperature at short-circuit currents is 160\u00b0\u0421, and in an emergency mode no more than 80\u00b0\u0421.<\/p>\n
The service life of the cables is 30 years. The guaranteed service life is 5 years.<\/p>\n